• lr-link(用来填充位置)
  • amazon
  • newegg
  • aliexpress
  • alibaba
  • Linkreal Co., Ltd.
  • Linkreal Co., Ltd.
  • Linkreal Co., Ltd.
  • Linkreal Co., Ltd.
  • Linkreal Co., Ltd.
  • Linkreal Co., Ltd.
BackHomeProductsEOL ProductsEOL Products
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter
  • 1-port Gigabit SC Etherent Network Adapter


PCIe x1 1000Base-SX SC Port MM Fiber NIC(Broadcom 5708S Based)
Key Features


  • Overview
  • Specifications
  • Ordering
  • Driver
  • Relative Products
LREC6210PF PCIe x1 1000Base-SX SC Port Multimode Fiber 1G Lan Card (BCM5708S Based)


The LR-LINK LREC6210PF multimode fiber 1g lan card is a high performance PCI Express multifunction network adapter for either standard or low profile slots running over a fiber-optic network environment. In addition to delivering Gigabit Ethernet networking, the Multimode Fiber 1G Lan Card LREC6210PF supports TOE (TCP/IP Offload Engine) for Windows only, Internet Small Computer System Interface (iSCSI).

Use of the server chipset can support more functions
Compatible all the OS
PCB 4 layer,1.5oz, 4mil,more stable, longer using time, smaller resistance
Two line power : 3.3v/1.2v
DC-DC power supply avoid the card be effected by power influence
All use the good quality materials
Multimode Fiber 1G Lan Card Support PXE
Use the TI power controller--the best controller manufacturer in the world, it can provide a stable working enviroment

Standard Features 

Performance Gigabit Ethernet Throughput
Up to 1000Mbps Ethernet transfer rate delivers outstanding network performance that improves response time and removes bottlenecks across the entire network

TCP/IP Offloading
TCP/IP Offload Engine (TOE) for Windows moves the processing of data in the TCP protocol stack from the server CPU to the network card, freeing CPU cycles for other duties.The LREC6210PFmultimode fiber 1g lan card supports TOE when Windows TOE Chimney is installed. With TOE, network communications are improved, and server efficiency is increased.

Accelerated iSCSI
Accelerated iSCSI allows theMultimode Fiber 1G Lan Card LREC6210PF to multi-function as both as a network adapter and as a storage host bus adapter, thereby providing access to storage platforms and to servers over a single connection.Additionally,theMultimode Fiber 1G Lan Card LREC6210PF offloads the iSCSI software to the hardware for improved performance.

Load Balancing
Transmit Load Balancing (TLB) and Switch-Assisted Load Balancing (SLB) are two advanced features used to build a bigger pipe for improved networking bandwidth.These port bonding techniques enable users to use up to eight adapter ports in a ProLiant server and aggregate their throughput up to a theoretical maximum of 16 Gigabits per second full-duplex transmission.

Checksum and Segmentation Offloads, and Interrupt Coalescing
When running as a standard Gigabit adapter, the LREC6210PFmultimode fiber 1g lan card features TCP Checksum Offloads as well as TCP Segmentation Offloads and Interrupt Coalescence. These features reduce the load on the CPU for overall improved system response. Interrupt Coalescence is a feature that groups multiple packets and issues a single interrupt to the host. This process improves host efficiency.

Scalability and Reliability
Network Fault Tolerance, sometimes called "failover" or "NIC redundancy," allows for the installation of multiple  server adapters or other network adapters so that the active device can be backed up by a redundant adapter to improve availability. The HP teaming utility also allows users to specify that when a failed adapter is fixed and replaced, the original adapter resumes its function as the primary network connection.

Management Support
LREC6210PF multimode fiber 1g lan card supports SNMP.

Configuration Utilities
Enable initial diagnostics within Windows, Linux, and DOS operating systems.Configure network adapter teaming in a Windows environment. The Windows adapter teaming configuration utility includes a patented teaming GUI for Microsoft Windows 2000 and 2003 operating systems. Support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations.

LED Indicator
A single bracket LED indicator shows link integrity and network activity for easy troubleshooting.

Technical Specifications

IEEE 802.3z, 802.3x, Dynamic 802.3ad, 802.3p, 802.1Q
PCI Express ver 1.0a

General Specifications 

Main chip: Broadcom 5708S
On-board memory: 92KB
Data rate: 1000 Mbps, Half- and full-duplex
Data path: One lane (x1) PCI Express compatible with x1, x4, x8, and x16 PCI Express slots
Interrupt levels: INTA
Multimode Fiber 1G Lan Card Connector: SC Port
Distance and cabling: Up to 1,804 ft/550 m with multimode fiber 
Distance and cabling: Up to 722 ft/220 m with multimode fiber 

Power and Environmental Specifications

Operating Temperature: 0 Centigrade to 55 Centigrade
Operating Humidity: 10% to 90% non-condensing
Non-operating Temperature: -40 Centigrade to 85 Centigrade
Non-operating Humidity: 5% to 95% non-condensing

Operating system support Standard Gigabit Ethernet

Windows XP 32-bit (64-bit)
Windows Server 2003 32-bit (64-bit)
Windows Vista 32-bit (64-bit)
Windows 7 32-bit (64-bit)
Windows 8 32-bit (64-bit)
Windows 8.1 32-bit (64-bit)
Windows Server 2008 32-bit (64-bit)
Windows Server 2008 R2 32-bit (64-bit)
Windows Server 2012
Windows Server 2012 R2
Sun Solaris
VMware ESX/ESXi 4.1/5.0/5.1/5.5




PCIe x1 1000Base-SX SC Port Multi-mode Fiber 1G Lan Card (BCM5708S Based)

PS:Above details are only for reference,if there are any changes, no inform will have.